SAP C_IBP_2302 Dumps – 100% Cover Real Exam Questions (Updated 82 Questions) [Q45-Q67]

QUESTION 45
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.

Create additional planning areas in the test system to support training needs.

Set up a three-tier landscape using transport, starting from the development system to test and production.

Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.

Create additional test planning areas in the production system to support cutover needs.

QUESTION 46
You are developing the functionality and appearance of the Excel UI for SAP IBP business users.Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding?Note: There are 2 correct answers to this question.

Changing the member names

Changing the layout of the master data workbooks

Changing the entries from the Name Manager

SAP IBP ribbon extension

QUESTION 47
You are setting up planing with lot sizes.What are some of the properties of lot sizes that you need to be aware of?Note: There are 2 correct answers to this question.

Lot sizes are applicable for production and handling quantities.

Periodic lot size setting overrides the minimum lot size.

Lot sizes are time-independent master data settings.

Lot sizes are applicable for production and transportation quantities.

QUESTION 48
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed?Note: There are 2 correct answers to this question.

Push and Pull production models are used by the optimizer.

Finite heuristics can achieve demand prioritization and pegging.

Planning results can be generated faster by the optimizer.

Prioritization of demand elements one by one is achieved by unconstrained heuristics.

QUESTION 49
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.

Key figures can be calculated across different planning levels.

The calculation chain for a key figure must always result in a calculated key figure.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

QUESTION 50
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.

A special key figure marked as an aggregate key figure (aggregate constraint)

A currency conversion key figure, such as exchange rate

A unit of measure key figure, such as UOMCONVERSIONFACTOR

A forecast metric key figure, such FCSTMAPE

QUESTION 51
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.

Use Excel Cell References in the Report Editor option is selected.

A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.

Users should have authorization for template administration.

Activate Local Member Recognition setting is selected.

QUESTION 52
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status “Fatal Error”. How can you find more details about the error?

Navigate to the Master Data Workbook in Excel and open the Log.

Download the Rejection Report in the Data Integration app.

Navigate to the Manage Master Data app and open the Log.

Download the Initial Problem Report in the Data Integration app.

QUESTION 53
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.What are the integration tools that you can use with such a setup for data transfer?Note: There are 2 correct answers to this question.

Cloud Identity Authentication Service

Real-time Integration

Cloud Integration for Data Services

Smart Data Integration

QUESTION 54
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?

Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.

Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.

Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.

Merge analytics and alerts into a new planning area from any sample planning area.

QUESTION 55
You are invited to review a problem with a customer’s SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.

Excessive SAP IBP formatting in the Microsoft Excel UI

Number of local members and complexity of calculations

Complex calculation graphs for key figures

Number of analytics charts displaying key figures’ values

QUESTION 56
What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.

By Number of Items (Sorted Values)

By Pareto Principle (Sorted and Cumulated %)

By Number of Items (Sorted Average)

By Pareto Principle (Sorted and Calculated Values)

QUESTION 57
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.

Periods are identified by an alphanumeric prefix and profiles by an integer.

Both periods and profiles are identified by a unique integer.

Both periods and profiles have start and end dates.

Periods are identified by an integer and profiles by an alphanumeric prefix.

QUESTION 58
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.

Capacity leveling will be possible for production and storage resources.

Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Minimum capacity utilization will result in pull production occurring.

QUESTION 59
What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.

Substitute missing values in case of sporadic demands.

Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment “B”.

Identify inventory items that require closer attention.

Choose time-independent key figures as segmentation measures.

QUESTION 60
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.

The name of the realignment step should be no longer than 20 characters.

You must mark the realignment step as “shared” and assign the steps to users.

The number of steps in the realignment run is limited to 255.

A realignment step can change master data, planning objects and key figures.

QUESTION 61
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?

Configuration items should be bundled in the collections based on the SAP IBP project stream.

A planning area with its time profile must be bundled in one collection.

A planning area with the copy operators assigned must be bundled in one collection.

You should delete collections after they have been transported.

QUESTION 62
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.

Supply chain graph in Supply Chain Network app

Jobs in the Applications Jobs app

Planning view templates in the SAP IBP add-in for Microsoft Excel

Snapshot operator in the SAP IBP add-in for Microsoft Excel

QUESTION 63
You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.

Units of measure are usually not time-dependent.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-independent.

Analytics provide the user with the option to select the target unit of measure.

Conversion to the target unit of measure is handled by SAP IBP Excel UI

QUESTION 64
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.

Use the Data Integration app to load suitable data that creates the combinations

Use the Check Mode operator to create the combinations

Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel

Use the Manage Master Data app to create the combinations

QUESTION 65
Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

QUESTION 66
Which applications are present in the sample model SAPIBP1?Note: There are 3 correct answers to this question.

Demand Driven Replenishment

Response Planning

Sales and Operations Planning

Inventory Optimization

Demand Sensing

QUESTION 67
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.

Setting a separate theme for the Home page in the Web UI.

Add the system name and tenant information from the About section to the Home page.

Defining a different default planning area via the User Preferences.

Having a different set of tiles in the Home group of apps.

SAP C_IBP_2302 Dumps – 100% Cover Real Exam Questions (Updated 82 Questions) [Q45-Q67]

Be the first to reply

Leave a Reply Cancel reply