Updated PDF (New 2023) Actual Salesforce OmniStudio-Developer Exam Questions [Q20-Q44]

Rate this post

Updated PDF (New 2023) Actual Salesforce OmniStudio-Developer Exam Questions

Verified OmniStudio-Developer Exam Dumps PDF [2023] Access using ActualTorrent

QUESTION 20
What pre-populates the data in a PDF used by an OmniScript?

ADataRaptor Load

ADataRaptor Extract

ASOGL Query

A DataRaptor Transform

QUESTION 21
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community’s theme.
What must the developer do to configure the FlexCard for deployment in a Community?

Set the Deployment property in Card Configuration to “Community”

Add the FlexCard’s API name to the FlexCard Player component

Set the Target property in Publish Options to “CommunityPage”

Configure the Component Visibility in the Custom Component

QUESTION 22
A developer needs to build a multi-step intakeform. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?

Check the Enable Cancel checkbox in the Setup tab under Cancel Options.

Add a navigation Action inside each step and set the Component name to ”Cancel”,

Add a navigation Action outside each step and set the Element Name to ”Cancel”,

Add a navigation Actioninside each step and set the Element Name to ”Cancel”,

QUESTION 23
Which property enables custom Lightning web components to override an individual OmniScript element’s component?

LWC Component Override

HTML Template ID

Element Type to LWC Component Mapping

Enable LWC

QUESTION 24
An OmniScript displays data from an API using an Integration Procedure, but some of the data is missing.
What error could cause this? Choose 2 answers

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.

The JSON sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure.

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

QUESTION 25
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?

BlockX.BlockYActionZ

ActionZ:BlockY:BlockX

BlockX:BlockY:ActionAZ

QUESTION 26
Users receive an APEC CPU limit Exceeded error when running an OmniScript in a Salesfoce Community.
The OmniScript includes an Integration Procedure that contains two DataRaptors.
Which two Location should the developer check to troubleshoot the issue?
Choose 2 answers

Script configuration

Community logs

DataRaptor configuration

Action Debugger

QUESTION 27
Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

QUESTION 28
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?

The fields have exceeded the maximum number allowed on the card.

The field is null 0 the Salesforce record.

{recordld} us misspelled in the Data Source Input Map.

There are no test parameters configured.

QUESTION 29
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

Both parent and embedded OmniScripts have the same element name for the Set values element.

A developer failed to include a Navigation Element to pass data from the parent OmniScript.

The LWC PubSub Message flag in the Set Values action of the parent has not been set.

The flag passDataJSON in the parent OmniScript in not configured correctly.

QUESTION 30
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?

To %%Details:Customer|0:ID%%

To %%Details:Customer|n:ID%

To %%Details:Customer|1:ID%

To $Details:Customer|0:ID$

QUESTION 31
Which description below best matches what Publish Options does?

Enable a FlexCard to use a Viocity Integration Procedure to return a set of actions

Configure metadata values and set the target for the published FlexCard

Make the FlexCard usable in the OmniScript Designer via the Custom LWC element

Enable grouping FlexCards by object type or by the order they appear in the database

QUESTION 32
A developer needs to configure a calculation procedure to calculation the sum of the entire Baseprice.
What is the most efficient way for the developer to meet this requirement?

Create a Postprocessor apex class to calculate the sum.

Add an Aggregation Step as SUM (BasePrice)

Add A Calculation Step as SUM (BasePrice).

Create a Preprocessor class to calculate the sum

QUESTION 33
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.

When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]”, How should the developer address this issue?

SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure

The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname

The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action

The valid field names should be added in the Domain object field in the DataRaptor

QUESTION 34
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 35
A developer is building an OmniScript and needs to save to Salesforce and to an AWS Order Management system.
Which OmniScript element could save all of this data?

DataRaptor Post Action

HTTP Action

Integration Procedure Action

DataRaptor Load Action

QUESTION 36
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?

DataRaptor Extract Action

REST API Action

Navigation Action

SOQL Action

HTTP Action

QUESTION 37
Refer to the exhibit below. A developer has configured an Integration Procedure element with SEND/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how could the developer configure Additional Input to send exactly the same data? Assume that the developer checked Send Only Additional Input.

QUESTION 38
What part of a DataRaptor Extract defines the JSON that is shared with Viocity apps?

Expected Output

Preview Response

Output JSON Path

Extract JSON Path

QUESTION 39
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

QUESTION 40
A developer writes an OmniScript that includes a DataRaptor that updates the Account statue based on information provided from the OmniScript. The information must be updated only if the Account record already exists. Otherwise, a new account must be created.
How should the developer accomplish this task?

Populate the Lookup object and Lookup fields

Check the Upset key and is required for Upsert checkboxes on the Account id field

Check the Upsert key checkbox on the Account Status field

Check Overwrite Target for all Null input checkbox on the Account id field

QUESTION 41
A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers

The Data Node field for the FlexCard is empty.

The RecordId in the Test Data Source settings ins for the wrong record type.

The attribute haven’t been configured to pass the data to the fields.

There is not Salesforce record for the FlexCard based on the RecordId in the layout’s Test Data Source Settings.

QUESTION 42
Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

QUESTION 43
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?

Toast Completion

Use Future

Invoke Mode Fire and Forget

Invoke Mode Non-Blocking

QUESTION 44
Refer to the exhibit below.

What is the reason that the fields fail to display the fetched data?

Lookup Mode is selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.

The typeHead key is not in the correct format.

Use Data JSON is Not selected in the properties of the Type Ahead Block.

Salesforce OmniStudio platform is a comprehensive suite of tools that enables developers to build, customize, and deploy applications quickly and easily. With OmniStudio, developers can create custom applications that integrate seamlessly with Salesforce, as well as other third-party tools and services. The platform includes a range of features, including drag-and-drop interfaces, pre-built templates, and powerful data management tools, making it an ideal choice for businesses of all sizes.

Try Best OmniStudio-Developer Exam Questions from Training Expert ActualTorrent: https://www.actualtorrent.com/OmniStudio-Developer-questions-answers.html

Updated PDF (New 2023) Actual Salesforce OmniStudio-Developer Exam Questions [Q20-Q44]

Be the first to reply

Leave a Reply Cancel reply