NEW 2025 Certification Sample Questions C_IBP_2502 Dumps & Practice Exam [Q40-Q58]

Rate this post

NEW 2025 Certification Sample Questions C_IBP_2502 Dumps & Practice Exam

C_IBP_2502 Deluxe Study Guide with Online Test Engine

SAP C_IBP_2502 Exam Syllabus Topics:

Topic	Details
Topic 1	Key Figures & Attributes: This section of the exam measures the skills of supply chain analysts and focuses on the key figures and attributes used in planning. It covers how to define and configure key figures to ensure accurate data representation and decision-making. Candidates are also tested on their ability to manage attributes that support various planning scenarios.
Topic 2	Planning Operators & Application: JobsThis section is designed for demand planners and focuses on the configuration and execution of planning operators and application jobs. It includes an understanding of how these tools automate planning processes and improve system performance. Candidates will be tested on their ability to configure and execute jobs that support various planning functions.
Topic 3	Model Supply Processes: This section assesses the expertise of supply chain planners in designing and managing supply processes. It includes setting up sourcing, inventory management, and supply constraints. Candidates will be evaluated on their ability to model supply networks and optimize resource allocation.
Topic 4	Model Sales & Operations Processes: This section targets operations managers and evaluates knowledge of sales and operations planning. It covers the alignment of supply and demand, scenario planning, and decision-making processes to optimize operational efficiency. Candidates will be assessed on their ability to configure models that support strategic business goals.
Topic 5	Demand Planning: This section measures the skills of demand planners and focuses on the core concepts of demand planning. It includes understanding forecasting techniques, demand sensing, and demand propagation. Candidates are tested on their ability to manage demand signals and align planning with business objectives.

QUESTION 40
Which of the following is a feature of Transportation Load Building (TLB)?

Loads are calculated based on transportation lanes and modes of transport

Loads are integrated into SAP ERP or SAP S/4HANA as distribution receipts

It uses rule-based planning to create transportation loads

Loads are calculated based on the minimum utilization of equipment

QUESTION 41
What are possible approaches to modeling a customer demand in time-series-based optimization with SAP IBP for response and supply? Note: There are 2 correct answers to this question.

Ensure discounting does not result in negative costs for each customer-product combination

Assign a high cost value (1 million or more) for non-delivery to priority customers

Ensure product prioritization with the combination of customer and product

Try to go as granular as possible with the customer product

QUESTION 42
What are some of the actions configurators can do when working with versions? Note: There are 2 correct answers to this question.

Delete key figure data for a date range for all versions at once

Copy key figure data from any version to any version

Copy master data from base version to other version

Run an application job to purge obsolete versions

QUESTION 43
Model configuration allows the attributes of a master data type to be assigned as key figures. Which feature is relevant for this type of object?

This type of key figure is not usually stored and it cannot be editable

This type of key figure has better performance than a time-independent key figure

This object usually provides a single value for a unique planning combination

This object contains user-defined criteria that monitor the running of business plans

QUESTION 44
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question.

Configure at least one calculated key figure for the planning area

Specify a planning horizon in the planning area for each level of the assigned time profile

Configure at most two input key figures on the same planning level in a key figure calculation

Assign the compound master data type and its component master data types

QUESTION 45
Which prerequisites must be met to maintain data types via the SAP IBP, add-in for Microsoft Excel? Note:
There are 2 correct answers to this question.

The Normalized setting is available in the Planning Area

Restriction types are set correctly

The Inquire tab is activated in Microsoft Excel

An applicable business catalog is assigned to your business role

QUESTION 46
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process? Note:
There are 2 correct answers to this question.

Splitting the values from detailed to aggregated level by using a copy operator

Splitting the values from aggregated to detailed level using multiplication by the proportions

Splitting the values from aggregated to detailed level, based on the time profile attribute

Splitting the values from aggregated to detailed level, based on a stored split-factor key figure

In SAP IBP, key figure calculations often involve disaggregation or aggregation across planning levels. Here, the task is to distribute (disaggregate) values from a higher aggregation level (PERPRODCUSTREGION, i.e., Product-Customer-Region) to a more detailed level (PERPRODCUST, i.e., Product-Customer). This is a common requirement in supply chain planning to allocate regional data to individual customer levels.
* Option A: Splitting the values from detailed to aggregated level by using a copy operatorThis is incorrect because the question specifies moving from PERPRODCUSTREGION (aggregated) to PERPRODCUST (detailed), not the reverse. A copy operator typically copies values without transformation, and aggregation moves data upward, not downward.
* Option B: Splitting the values from aggregated to detailed level using multiplication by the proportionsThis is correct. In SAP IBP, disaggregation can use proportional factors to split aggregated data. For example, if PERPRODCUSTREGION has a total value (e.g., 100 units), it can be distributed to PERPRODCUST based on predefined proportions (e.g., Customer A gets 60%, Customer B gets
40%). This is configured in the key figure’s disaggregation settings using a proportional calculation, a standard feature in SAP IBP’s time-series planning.
* Option C: Splitting the values from aggregated to detailed level, based on the time profile attributeThis is incorrect. Time profile attributes (e.g., week, month) govern temporal granularity, not the structural disaggregation between planning levels like PERPRODCUSTREGION and PERPRODCUST. Disaggregation in SAP IBP is driven by key figure settings, not time profile attributes directly.
* Option D: Splitting the values from aggregated to detailed level, based on a stored split-factor key figureThis is correct. SAP IBP supports disaggregation using a stored key figure as a split factor. For instance, a key figure like “Customer Distribution Ratio” (stored at PERPRODCUST) can define how the aggregated value (e.g., 100 units at PERPRODCUSTREGION) is split (e.g., 70 units to Customer A, 30 units to Customer B). This method is widely used in SAP IBP for precise, data-driven disaggregation, as documented in SAP’s configuration guides.
Thus, B and D align with SAP IBP’s disaggregation capabilities, leveraging proportions or stored split factors to move data from an aggregated to a detailed level.

QUESTION 47
You need to make manual adjustments to your S&OP plan. Which are possible ways of making these changes? Note: There are 2 correct answers to this question.

Leveraging the web-based planning capability

Leveraging the functionality of SAP Work Zone

Using Microsoft Excel planning views

Using Driver-Based Planning

QUESTION 48
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, add-in for Microsoft Excel, and you are receiving an error related to missing combinations. How can you resolve this problem? Note: There are 2 correct answers to this question.

Use the Data Integration app to upload the missing combinations

Use the Manage Master Data app to create missing combinations

Use the function New Planning Object in Excel UI to create missing combination

Use the Copy Operator to create the missing combinations

QUESTION 49
Analytics charts are created by the user in the Advanced Analytics application. What can the user do in the Advanced Analytics app? Note: There are 2 correct answers to this question.

Trigger export to Manage Analytics Stories

Merge charts together

Apply filters on the data

Group data

QUESTION 50
Which Supply Planning processes are part of the tactical planning level within a planning hierarchy? Note:
There are 2 correct answers to this question.

Order Prioritization

Stock Replenishment

Inventory Build and Reduction

Balancing Supply and Demand

QUESTION 51
As an architect, you are configuring the Planner Workspaces user interface settings. Which appearance settings are on your to-do list? Note: There are 3 correct answers to this question.

Adding planning view

Add Navigation profile

Define key figure formatting

Add custom alerts

Add playbooks for alerts

QUESTION 52
You need to create time periods for the time profile in a planning area. What should you be aware of when running the Create Time Periods application job?

The planning area to which the time profile is assigned must be active

This application job can also be triggered from SAP IBP, add-in for Microsoft Excel

A time profile has to be activated so that the application job can proceed

It is mandatory to specify the planning area in the Parameter Section of the application job

QUESTION 53
You are invited to review a problem with a customer’s SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct answers to this question.

Excessive SAP IBP formatting in the Microsoft Excel UI

Number of local members and complexity of calculation

Complex calculation graphs for key figures

Number of analytics charts displaying key figures’ values

QUESTION 54
You need to work in two separate sessions for two different SAP IBP tenants. What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question.

Define a different default planning area via the User Preferences

Have a different set of tiles in the Home group of apps

Set a separate theme for the Home page in the Web UI

Add the system name and tenant information from the About section to the Home pages

QUESTION 55
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned? Note: There are 2 correct answers to this question.

Created as type DECIMAL and assigned to an external master data type

Created as type INTEGER and assigned to a compound master data type

Created as type INTEGER and assigned to a simple master data type

Created as type DECIMAL and assigned to a compound master data type

QUESTION 56
Which processes are running in sample planning areas SAP6 and SAP3?(Choose three)

Supply and Allocation Planning

Inventory Optimization

Demand Sensing

Sales and Operations Planning

QUESTION 57
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to?
Note: There are 2 correct answers to this question.

Planning view templates in the SAP IBP, add-in for Microsoft Excel

Jobs in the Application Jobs app

Compare function in the Planning Areas app

Supply chain graph in Supply Chain Network app

QUESTION 58
You are developing the functionality and appearance of the Excel UI for SAP IBP business users. Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding?
Note: There are 2 correct answers to this question.

Changing the member names

SAP IBP ribbon extension

Changing the entries from the Name Manager

Changing the layout of the master data workbooks

C_IBP_2502 dumps review – Professional Quiz Study Materials: https://www.actualtorrent.com/C_IBP_2502-questions-answers.html

NEW 2025 Certification Sample Questions C_IBP_2502 Dumps & Practice Exam [Q40-Q58]

SAP C_IBP_2502 Exam Syllabus Topics:

Be the first to reply

Leave a Reply Cancel reply

SAP C_IBP_2502 Exam Syllabus Topics: