[Sep 08, 2022] New Oracle 1Z0-1032-21 Dumps with Test Engine and PDF (New Questions) [Q18-Q33]

Q18. You are designing a program that requires the use of a value that is not stored in the Responsys data model and is only temporarily required for use in the program.
What could you use to fulfill this requirement?

Temporary Value Variable

Get Data Variable

ORA Variable

Custom SQL Variable

Entry Tracking Variable

Q19. You built a seed group with three records to test combinations of data during campaign proof testing. All fields required for personalization are populated with test data. But when you try to preview or proof launch a promotional email campaign, an errormessage states that the proof list is empty.
Why is this happening?

You must have missed populating some of the fields being used for personalization in the records.
Check the data in the seed group for completeness.

The seed group is corrupted. You must delete and re-create the seed group with the test data desired.

You can only launch emails to a seed list; you cannot preview or send a proof launch to the seed list records.

When the EMAIL_PERMISSION_STATUS value for records in a seed group is set for O for Opt out, Responsys will suppress displaying personalization in preview mode or sending emails to those contacts. Confirm that EMAIL_PERMISSION_STATUS is set to I for Opt In.

Q20. Your profile list is named CONTACTS. Your supplemental table is ORDERS with a Data Extraction Key of CUSTOMER_ID_ and a Primary Key of ORDER_ID, with TOTAL_ORDER_DOLLARS as a column. You design acampaign to display the ORDER_ID and TOTAL_ORDER_DOLLARS with a default value of 0 (zero) from the ORDERS table for each recipient in the target audience from your CONTACTS list.
What happens if there are multiple matches (more than one ORDER_ID) for a CUSTOMER_ID?

Because multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, no matching values will be pulled at all, and the default value of 0 (zero) will be used for every email generated.

The campaign launch will error out when Responsys detects multiple matches with the CONTACI’S list from the ORDERS table.

When multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, the first found match will be used in the campaign.

During the campaign worklist build, Responsys will pause and ask you to select the correct record to use for the campaign personalization.

Q21. An SSH2 key pair can be created to be used for authentication to establish a secure connection between your server and the Oracle file server.
Which key from the client key pair must you send to Responsys?

Private

Public

Secure

Master

Q22. You are working on a campaign to collect responses for 45 days.
How should you ensure that it closes 45 days after launch?

In the Campaign Workbook’s Launch Options, configure 45 days for Auto-Close after launch.

Create a calendar reminder and manually close the campaign.

In the Program Designer, configure 45 days for Auto-Close after launch.

In ManageCampaigns, select 45 days for the end element.

Q23. Which three actions will change the EMAIL_PERMISSION_STATUS_ column for a prole list contact from opt-in toopt-out? (Choose three.)

Recipient deletes a promotional email from the inbox.

Use Set Data in a Responsys Program to change the EMAIL_PERMISSION_STATUS_ column in a profile list record from I to O.

Recipient selects a Reply-to unsubscribe in a promotional email.

Recipient registers a SPAM complaint for an email.

Recipient inbox is full, so the promotional email is rejected by the server.

Q24. You just completed putting all the HTML and RPL into the Email Message Designer (EMD). You want to see how Responsys will render this code.
What should you do to see this?

Click the Preview button, which has the eye icon on it.

Select Workbook > Test.

Click the Render button.

Click the Version Test button.

Q25. Which statement is true about how you must configure a Responsys Profile list so you can beginsending Mobile SMS campaigns?

You only need to define the COUNTRY_ code if you are sending SMS messages to subscribers outside of the default country setting for your account.

You can only modify profile lists used for mobile campaigns through Connect uploads.

You can use the same Profile list for mobile campaigns that you are currently using for email campaigns.

All the data that you need to use to personalize mobile messages must be stored as columns in the Profile list.

Q26. In every email, your client wants to provide a link so customers can download their latest menu. They want to serve this from the Responsys content library, updating the document periodically.
How can they accomplish this?

Upload the document into Manage Hosted Content, then publish. Insert this URL into every email document. To update, unpublish the document, upload the current version with the same name, and publish.

Upload the document into the Content Library. From the document pull-down menu, select Create Embeddable URL and copy the URL into every email. Uploadand overwrite this document with the most current version as needed.

Your client must host and update the document from their own content server and provide the URL to Responsys. In the Responsys email documents, use the ServeURL function to reference the document as needed.

Upload the document into the Content Library. Right-click the document and select Copy Link. Insert this link into every email document. Upload and overwrite this document as needed.

Q27. How can you share a copy of a campaign with key stakeholders at live launch time?

Create a Proof List with their email addresses and then use the Seed List feature in the Campaign Workbook.

Export the campaign from Message Designer, then copy and paste the source HTML in an email to send to them.

Create a Seed Group with their email addresses. In the Audience Selection section of the Campaign Workbook, select this group as your Seed List.

Use the RPL proofLaunch () method with each of the recipient’s email addresses as a parameter.

Create a filter for these individuals and then use the Seed List feature in the Campaign Workbook.

Q28. You need to create four versions of the same campaign with different subject lines to see which one receives the most opens and clicks. You are using EMD to create thecampaign.
How should you do this with Responsys?

Create one campaign. Then in the program, configure a winner selection element and a Send Email Campaign element for the campaign. Publish the campaign and then determine the winner in a few days.

Create four campaigns and configure the multivariate testing functionality available via the Version Test button in EMD for each campaign.

Create one campaign and configure the multivariate testing functionality available via the Version Test button in EMD of the campaign. Create a program that launches this campaign.

Create four campaigns. Then in the program, configure a winner selection element and a Send Email Campaign element for each campaign. Publish the campaign and then determine the winner ina few days.

Q29. You want to accesscart and browse abandonment events on your ecommerce website and launch personalized retargeting marketing programs to your known users.
How can you use Rapid Retargeter to capture and expose the events in Responsys in order to accomplish this?

Passthe event data into a Responsys supplemental table near real time with an API call. Backend tables are then automatically updated, so you can use Filter Designer for targeting.

Write the event data into external tables. Batch upload the data into a Responsys supplemental table via Connect every hour and then use SQL to pull data for personalization.

Capture the events and use an API to write them into profile extension tables in the client’s Responsys account and then use SQL to pull data for personalization.

After your website is correctly tagged, use the Interaction Events to enter your contacts into a Program and pass key visitor data as Program Entry Variables.

Q30. The executive tearn loves your Insight reports, but has limited knowledge of the Responsys menus.
As the Responsys Administrator,how can you provide a custom report that the team can easily access from the Insight menu?

Create the custom report and schedule it to be sent by email to the executive team every single day.

Create the custom report and save it to the Insight account folder. Add the report to the Default Dashboard, and tell the executives to view the report from the dashboard whenever they want to view the report.

Create the custom report and save it to the Insight account folder. Right-click to copy the link forthe report. Send the link to the executive team and tell them to use it whenever they want to view the report.

You can only access custom reports from the account folder. You must train the executives to navigate to the Report Library to locate and launch the report.

Q31. How should you set up files that list all the daily Opt-In and Opt-Out events collected by Responsys?

Create a SQL view that retrieves the Opt value column. Using Oracle Database Developer, connect to your Responsys database andpull the view data.

In Program, you can use the SetData element to set this value to a supplemental table created to collect this information. The supplemental table can then be exported on a daily basis.

An export of the profile list can be done ona daily basis. From this file, the Opt-In and Opt-Out can be extracted using a tool such as Excel.

An Event Data Feed export can be created to run on a daily basis with Opt-In and Opt-Out event types selected.

Q32. You declared a field, FIRST_NAME, from your profile list in your campaign.
What is the correct RPL syntax to personalize your content with the first name of your customer in the email campaign?

{FIRST_NAME} $

$FIRST_NAME

{FIRST_NAME}

$ {FIRST_NAME}

Q33. You want touse Responsys SMS that invites recipients to click a link to a web form to register for a special event. You wish to measure clicks and form submissions (conversions).
Which four steps should you perform to make this possible? (Choose four.)

You mustpurchase Premium tracking in order to support link tracking in Responsys.

You must select a Responsys link table with the link names and URLs to be used in the SMS message.

In the SMS campaign message designer, enable conversion tracking.

You mustsupply a short URL, so you can use bit.ly to shorten links that you wish to use in your text message.

In the SMS campaign message designer, you must enable link tracking for the campaign.

[Sep 08, 2022] New Oracle 1Z0-1032-21 Dumps with Test Engine and PDF (New Questions) [Q18-Q33]

Be the first to reply

Leave a Reply Cancel reply