Get 1z0-1066-22 Actual Free Exam Q&As to Prepare for Your Oracle Certification [Q12-Q36]

Rate this post

Get 1z0-1066-22 Actual Free Exam Q&As to Prepare for Your Oracle Certification

Oracle Actual Free Exam Questions And Answers

Oracle 1z0-1066-22 Exam Syllabus Topics:

Topic	Details
Topic 1	Configure Attribute-Based Planning Planning for Counter Sales Orders Contract Management Collaboration
Topic 2	Managing Sourcing and Approved Suppliers Configure Safety Stock Plan options
Topic 3	Evaluate and Execute Simulations Explain Simulate Forecast Scenarios
Topic 4	Apply Item Attributes for Supply Planning Configure, Run and Manage a Demand Plan
Topic 5	Create and Manage a Constrained Supply Plan, including Material and Resource Constraints Managing Planners, Security and Profile Options

NO.12 When analyzing demand fulfillment, what are the three types of recommendations that users can review and accept for expediting? (Choose three.)

Expedite transfer orders

Expedite make orders

Expedite buy orders

Expedite drop ship orders

Expedite make to stock orders

NO.13 Which release recommendation parameter can you utilize to govern the behavior of the auto-release process?

Release Only by User

Auto-Release Interval in Days

Auto-Release Planned Order Time Fence

Quick Release Time Fence

Compression Days Tolerance for Automatic Release

NO.14 Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?

Yes, if the adjustment is made below the aggregation level at which it is viewed.

Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.

No, both measures will always be different.

Yes,if the demand plan is approved and values are locked.

Yes,if the demand plan hasn’t been run again after adjustment.

NO.15 You want to be able to filter your data by the planner code attribute on the item. Where can you go to do this?

Configure Planning Analytics > Levels and Attributes tab

The process “Add Levels and Attributes” must be run to associate new attributes.

The process “Associate Measure Catalog Attributes” must be run to associate new attributes.

Enable planner code on Planning Analytics page.

Configure Planning Analytics > Measure Catalog

NO.16 Which KPIs are available to measure forecasting accuracy and specify how these measures aggregated from item-organization level to higher levels.

MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.

MAPE, MAD, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MAD is aggregated using sum.

MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MFE is aggregated using sum.

MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and MFE are aggregated using weighted average. Bias is aggregated using sum.

NO.17 You have executed Planning Data Collection and want to confirm that data has successfully been collected. Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page. (Choose three.)

Customer Location and Carriers

Safety Stock and Subinventories

Sales Channel and Demand Class

Calendar and Master Organization

Supplier Site and Service Level

NO.18 Which three statements are true regarding exceptions? (Choose three.)

The conditions under which exceptions are generated can be modified.

You can act on an exception by selecting it and clicking ‘Resolve exception’. A list of ways to resolve will be generated.

The calculation logic for exceptions can be modified.

You can drill down into Supplies and Demand from an exception line.

You can export exception tables to Excel.

You can create custom exceptions.

NO.19 You want to understand what your inventory turns are for your organization. Where can you see this information in Planning Central?

Manage Planning Analytics

Manage Planning Measures

View Planning Analytics

Manage Metrics

Plan Summary

NO.20 You are viewing a drop shipment plan for your organization and you want to know which customer the purchase order will be shipped to. Where can you see that?

You need to first drill down to the sales order from the supply-demand link, then open the sales order to get the customer.

It is visible in the drop ship analytics.

It is not viewable at this time.

You can see the customer on the supply in Supplies and Demand.

You can see the supplier on the sales order, but not vice-versa.

NO.21 Which three statements are true about a drop ship validation organization? (Choose three.)

It is the source for organization-item attributes when creating drop ship planned orders.

It can be a Cost Organization.

It is not required in order to use drop shipments.

It cannot be an item organization.

It is a proxy for the organization during the collections of drop ship sales orders and drop ship history.

It can be an item organization.

NO.22 As a new planner, you want to test simulation set functionality. You have created a simulation set named ‘Test Simulation Set.’ In this simulation set, you have already added Item 98573. You would like to change the item specification ‘Fixed Order Quantity’ to 10 within this simulation set.
Which sequence will allow you to accomplish this task?

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘set value as’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘View’ > Select ‘Columns’ > Check box next to Fixed Order Quantity specification> the ‘Fixed Order Quantity’ will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘reset to original’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

NO.23 Your client has a requirement to restrict Supply Plan data access. Identify three Data Access Set detail entities that can be used to restrict plan data access. (Choose three.)

Supplier

Item

Transaction Type

Customer

Material Planner

Demand Class

NO.24 You are setting up the plan page layout for your customer.
In which of these requirements would you use an Infotile?

Showing customer demand trend over a specific time period

Showing inventory values by product category

Showing a breakdown of exception in a pie chart

Showing on-hand value compared to targets

Showing inventory value across time

NO.25 You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?

The organization was not enabled for collection under Manage Planning Source Systems.

The organization must be enabled in Manage Planning Parameters.

The organization is an Item Organization.

The organization must be enabled in Manage Planning Profile Options.

You do not have data access to the organization.

NO.26 Which statement applies only to the planning of back-to-back items and not standard items?

Planning analyzes supply shortages and capacity overloads using any of the standard planning tools.

Must use Global Order Promising and Supply Chain Orchestration to release and create new supplies

Must have added sourcing rules to the Global Order Promising assignment set.

Planning pegs reserved supplies to sales orders.

Planning collects bookings or shipments history to forecast items.

NO.27 What happens when a demand planner approves a demand plan and then adjusts shipment history and runs demand plan again?

The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. After a forecast is approved, the approved values remain unchanged until the forecast is approved again.

The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures “not editable.” After a forecast is approved, the Final Shipments Forecast and Final Bookings Forecast measures remain unchanged until the forecast is approved again.

The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures “not editable.” But any subsequent demand plan run can change Final Shipments Forecast and Final Bookings Forecast values.

The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. Any subsequent demand plan run can change final shipments or bookings forecast values that will automatically update the approved forecast measures.

NO.28 Your client wants to create a supply plan that only considers sales order and disregards forecast demand within a specific demand horizon. What must you do to accomplish this?

Manage Plans > Search and select supply plan > Supply tab > Organizations and Schedules tab > Remove all demand schedules

Manage Plans > Search and select demand plan > Demand tab > General tab > Select ‘Do no spread forecast’

Manage Plans > Search and select demand plan > Demand tab > General tab > Check Demand Time Fence Control

Manage Plans > Search and select supply plan > Supply tab > General tab > Advanced Options > Check ‘Create time fence’

Manage Plans > Search and select supply plan > Supply tab > General tab > Check Demand Time Fence Control

NO.29 You ran a demand plan and you are reviewing the shipments forecast value measure. It is always zero for a particular item. Identify the root cause of this problem.

In planning measures catalog, shipment forecast value measure is not enabled at item and organization level.

In plan parameters, Item List Price marked as primary does not have price defined for the particular item.

In plan parameters, shipment forecast value measure expression is not defined.

In planning measures catalog, shipment forecast measure is not enabled at item and organization level.

NO.30 How can you deliver a forecast for drop shipments?

It cannot be done at this time.

Generate manually using Planning Analytics

Excel upload using File Based Data Import Process

Create based on the supplier performance for drop shipment collection

Create based on the drop shipment or booking history; the ship from will be the drop ship validation organization

NO.31 Your Procurement Department is getting ready to set up Approved Supplier Lists that will be needed for Supply Planning. They ask you for what you need on the ASLs for planning usage. Which three options are key for planning? (Choose three.)

Make sure to include Maximum Order Quantities.

Make sure to include Minimum Order Quantities.

Make sure to include Fixed Lot Multipliers.

Make sure to include Fixed Order Quantities.

Make sure they are at a Global level.

Make sure all Local level ASLs include an Organization.

NO.32 Your client wants to utilize product categories on sourcing rules. They have created a new category for this and populated the items for it.
Where do they set up the category planning uses when evaluating sourcing rules?

Manage Planning Profile Options

Manage Plans

Manage Sourcing Rules

Manage Assignment Sets

Manage Planning Source Systems

NO.33 During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)

CSV file must be generated.

Collect Planning Data Process must be run from Planning.

Collect Legacy Data Process must be run from Planning.

Load Interface File for Import Process must be run.

Flat File must be zipped.

NO.34 When planning for customer demand to be fulfilled from internal organizations or from a contract manufacturer, what are the four types of planned orders that can be generated? (Choose four.)

Make orders for items being manufactured in the contract manufacturer organization.

Transfer orders for internally owned components being transferred from contract manufacturer to internal organizations.

Transfer orders for internally owned components being transferred from internal organizations to contract manufacturer organizations.

Transfer orders for finished goods being transferred from contract manufacturer organizations to internal organizations.

Buy orders for components purchased at internal organizations and contract manufacturer organizations.

Return orders for items being manufactured in the contract manufacturer organization.

NO.35 In order for Supply and Demand Plans to run successfully, which three Configure Planning Analytic tasks must be completed? (Choose three.)

Set up Levels and Attributes

Set up Measure Catalogs

Run the Configure Dimension Catalog process

Set up Default Catalogs

Set up Dimension Catalogs

Set up Hierarchy Attributes

NO.36 Which two statements are true regarding Planning Business Flows? (Choose two.)

Inventory Planning cannot run in the Planning Business Flows.

You can analyze and adjust data at any stage of the process.

In automated plans, all release rules must be automatic.

Demand and Supply Planning have to be run in separate business flows.

Planners can set up automatic release rules or release orders manually as part of the plan execution.

1z0-1066-22 Questions Truly Valid For Your Oracle Exam: https://www.actualtorrent.com/1z0-1066-22-questions-answers.html

Get 1z0-1066-22 Actual Free Exam Q&As to Prepare for Your Oracle Certification [Q12-Q36]

Oracle 1z0-1066-22 Exam Syllabus Topics:

Be the first to reply

Leave a Reply Cancel reply

Oracle 1z0-1066-22 Exam Syllabus Topics: