NSE 7 Network Security Architect Real Exam Questions and Answers FREE NSE7_PBC-6.4 Updated on Nov 05, 2023 [Q16-Q32]

NO.16 Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)

Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.

Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.

Network ACLs must be manually applied to virtual network interfaces.

Network ACLs support allow rules and deny rules.

NO.17 Refer to the exhibit.

Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01

172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01

The network interface of the active unit moves to itself

SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01

NO.18 You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?

GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.

GuardDuty, CloudWatch, S3, and DynamoDB.

Inspector, Shield, GuardDuty, S3, and DynamoDB.

WAF, Shield, GuardDuty, S3, and DynamoDB.

NO.19 Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A single VPC deployment with multiple subnets and a NAT gateway

A single VPC deployment with multiple subnets

A multiple VPC deployment utilizing a transit VPC topology

A multiple VPC deployment utilizing a transit gateway

NO.20 Refer to the exhibit.

Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)

Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.

Use ExpressRoute to interconnect the hub VNets and spoke VNets.

Configure VNet peering between the spokes only.

Configure VNet peering between the hub and spokes.

NO.21 What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

NO.22

Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01

172.29.32.71is set as a next hop IP for all routes under FortigateUDR-01

The network interface of the active unit moves to itself

SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01

NO.23 Refer to the exhibit.

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)

The web servers are not configured with the default gateway.

The Internet gateway (IGW) is not added to VPC (virtual private cloud).

AWS source and destination checks are enabled on the FortiGate interfaces.

AWS security groups may be blocking the traffic.

NO.24 An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

They can create additional vNICs using the Cloud Shell.

They cannot create and add additional vNICs to an existing FortiGate-VM.

They can create additional vNICs in the UI console.

They can use the Compute Engine API Explorer.

NO.25 Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)

Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute

Configure a user-defined route table

Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table

Configure the gateway subnet as the subnet in the user-defined route table

Define a default route where the next hop IP is the FortiGate WAN interface

NO.26 Refer to the exhibit.

You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?

You selected the incorrect resource group.

You selected the Bring Your Own License (BYOL) licensing mode.

You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

NO.27 An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?

None, you cannot create and add additional ENIs to an existing FortiGate-VM.

Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.

Create the ENI, attach it to FortiGate, and then restart FortiGate.

Create the ENI and attach it to FortiGate.

NO.28 Which two statements about Microsoft Azure network security groups are true? (Choose two.)

Network security groups can be applied to subnets and virtual network interfaces.

Network security groups can be applied to subnets only.

Network security groups are stateless inbound and outbound rules used for traffic filtering.

Network security groups are a stateful inbound and outbound rules used for traffic filtering.

NO.29 Refer to the exhibit.

You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?

The LUN ID is not defined.

FortiGate-VM does not support managedDisk from Azure.

The caching parameter should be None.

The CreateOptions parameter should be FromImage.

NO.30 What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

NO.31 A company deployed a FortiGate-VM with an on-demand license using Amazon Web Services (AWS) Market Place Cloud Formation template. After deployment, the administrator cannot remember the default admin password.
What is the default admin password for the FortiGate-VM instance?

The admin password cannot be recovered and the customer needs to deploy the FortiGate-VM again.

<blank>

admin

The instance-ID value

NO.32 Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A single VPC deployment with multiple subnets and a NAT gateway

A single VPC deployment with multiple subnets

A multiple VPC deployment utilizing a transit VPC topology

A multiple VPC deployment utilizing a transit gateway

NSE 7 Network Security Architect Real Exam Questions and Answers FREE NSE7_PBC-6.4 Updated on Nov 05, 2023 [Q16-Q32]

Be the first to reply

Leave a Reply Cancel reply