Latest [Jul 16, 2024] 300-510 Exam Questions – Valid 300-510 Dumps Pdf [Q136-Q155]

Rate this post

Latest [Jul 16, 2024] 300-510 Exam Questions – Valid 300-510 Dumps Pdf

300-510 Practice Test Questions Answers Updated 253 Questions

Cisco 300-510 exam tests the candidates’ knowledge and skills in implementing advanced routing technologies, such as Border Gateway Protocol (BGP), Multiprotocol Label Switching (MPLS), and Quality of Service (QoS) in a service provider environment. 300-510 exam also covers topics such as network security, network virtualization, and network automation.

Cisco 300-510 exam is a certification test that validates the skills and knowledge of IT professionals in implementing advanced routing solutions in a service provider environment. 300-510 exam is designed for network engineers and other professionals who want to enhance their expertise in deploying and managing complex routing technologies such as BGP, OSPF, and IS-IS.

 

NEW QUESTION 136
Refer to the exhibit.

An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?

 
 
 
 

NEW QUESTION 137
An engineer warns to map a multicast IP address to a multicast MAC How many bits are used to make the conversion?

 
 
 
 

NEW QUESTION 138
Refer to the exhibit.

Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)

 
 
 
 
 

NEW QUESTION 139
Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

 
 
 
 

NEW QUESTION 140
Refer to the exhibit.

Refer to the exhibit Reuters R2. R3, R4 and R5 all reside in the same area, with R1 in a different area R3 is overutilized and the engineer wants to reduce its CPU load The engineer configured router R4 to summarize routes that it receives from R5. but R3 is still receiving all of the R5 routes. Which action resolves the issue?

 
 
 
 

NEW QUESTION 141
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

NEW QUESTION 142
Refer to me exhibit. A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501.

The engineer wants to block all the routers coming from ASN 64502. but allow all the others. For that purpose, the following AS Pam prefix 1st s being used:
(config)#ip as-path access-list 10 deny _64502$
What must be fixed to achieve this result?

 
 
 
 

NEW QUESTION 143
Refer to the exhibit.

P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other. Which two actions fix the issue? (Choose two.)

 
 
 
 
 

NEW QUESTION 144
Refer to the exhibit. A service provider has LDP and segment routing running in the network.
Mobility traffic is carried through LDP and enterprise traffic is carried through segment routing.
Which configuration must be implemented to connect the bank branch with the HUB site on routers?

 
 
 
 

NEW QUESTION 145
Refer to the exhibit.


Refer to the exhibit. A network engineer is investigating a report of packet drops between the branch site and the central site.
The two sites are connected via OSPF and RSVP-TE tunnels.
Traffic from the central site to the branch site is passing normally.
Technicians at both sites successfully ping the loopback IP addresses on routers R1 and R2.
Which configuration corrects the packet-drop problem?

 
 
 
 

NEW QUESTION 146
Refer to the exhibit. Users connected to an application on 1.1.1.1 via routers CE1 and CE2 are complaining of frequent disconnections. While troubleshooting the issue, a network engineer with an employee ID: 1234:56:789 determined that the application itself is working normally, but the link connected to the 1.1.1.1 application is flapping. The users on CE1 and CE2 are accessing applications on 2.2.2.2 without difficulty. Which action resolves the issue?

 
 
 
 

NEW QUESTION 147
Refer to the exhibit. IS-IS is the IGP for the network, where routers R1, R2, R3, and R4 are Level
1 routers in Area 12 and routers R5 and R6 are Level 2 routers in area 16. According to the network design, router R1 must send traffic to R6 using R4 as its next hop. To meet the requirement, a network engineer configured route filtering on R2 to prevent the route to R6 from being advertised from R2. However, R1 is still using R2 as the next hop. Which action must the engineer take to resolve the issue?

 
 
 
 

NEW QUESTION 148
Which technique should be permitted on ASA Firewall to allow MSDP Peering?

 
 
 
 

NEW QUESTION 149
Refer to the exhibit.

Refer to the exhibit. Mid-sized company Z connected two branch offices via a multicast-enabled ISP using the BGP routing protocol. PIM was implemented to support multicast streaming between the branches via MSDP Client A cannot connect to the multicast stream source of company Z. The network engineer ran a debug on the edge of the network as shown. Which action resolves the issue?

 
 
 
 

NEW QUESTION 150
Refer to the exhibit. Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally.
Which two statements describe the problem? (Choose two.)

 
 
 
 
 

NEW QUESTION 151
Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3.
The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available.
Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?

 
 
 
 

NEW QUESTION 152
Refer to the exhibit. VPN users that are connected to PE routers are facing network issues.
Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image. Which action must be implemented to resolve the issues?

 
 
 
 

NEW QUESTION 153
Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied.
The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other.
Which two actions fix the issue? (Choose two.)

 
 
 
 
 

NEW QUESTION 154
Refer to the exhibit. MPLS traffic from 192.168.4.0/24 to 192.168.5.0/24 is failing to pass over the link from R4 to R2. The engineer verified that:
– Cisco Express Forwarding is enabled on all routers.
– All routers reach all networks via OSPF.
– MPLS traffic from 192.168.1.0/24 to 192.168.3.0/24 is passing
normally over the link from R1 to R2.
Which action resolves the issue?

 
 
 
 

NEW QUESTION 155
An engineer is troubleshooting a connectivity issue across the MPLS network and is verifying the forwarding behavior of packets.
Which table does the engineer look at to verify the forwarding behavior of an IP packet as it enters the MPLS network at the ingress LSR?

 
 
 
 

300-510 dumps Sure Practice with 253 Questions: https://www.actualtorrent.com/300-510-questions-answers.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Be the first to reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below