[Q426-Q445] Get New 2025 CompTIA 220-1101 Exam Dumps Bundle On flat Updated Dumps!

NEW QUESTION 426
New memory modules were installed in several Windows desktops but some users are still reporting performance issues. Upon investigation, a systems administrator notices the desktop has not recognized the new memory modules. Which of the following should the systems administrator perform to help resolve this issue?

Configure appropriate settings within the BIOS

Replace the RAM

Modify the boot. ini file.

Install the required drivers through the Control Panel

NEW QUESTION 427
A salesperson is using a weather application on a mobile device. The application appears to be draining the device’s battery very quickly. Which of the following is the BEST action for the salesperson to take in order to view weather forecasts while traveling?

Enable the GPS service to ensure accurate location detection.

Update the PRL when getting to a new location.

Configure less location checks using cellular location services,

use the offices’ Wi-Fi IP addresses as the geolocation mechanism.

NEW QUESTION 428
A user added a heater underneath a desk, and now an external monitor is not working. A technician verified the monitor gets power. Which of the following should the technician do next?

Have the user unplug the heater.

Replace the monitor.

Open the display settings on the computer.

Ensure a VGA cable is connected properly.

NEW QUESTION 429
Which of the following 802.11 standards supports both 5GHz and 2.4GHz channel frequencies?

802.11a

802.11c

802.11b

802.11g

NEW QUESTION 430
A technician recently reinstalled a previously virtualized application directly to a user’s computer. Now, the application is not launching. Which of the following did the technician most likely do to cause this issue?

Installed the software on the base operating system.

Installed the wrong license type.

Installed the application with administrator rights.

Reset the user’s application virtualization session.

NEW QUESTION 431
A technician is troubleshooting a workgroup printer that has stopped printing after several days of heavy use.
The technician runs the diagnostic tool in the printer’s administrator menu. Which of the following issues is the technician most likely to encounter?

Corrupt job in print spooler

Insufficient space in the printer

Network connectivity issues

Improperly installed drivers

The most likely issue that the technician will encounter is A. Corrupt job in print spooler.
A corrupt job in the print spooler is a common problem that can cause a printer to stop printing or print slowly.
The print spooler is a service that manages the print queue, which is a list of documents that are waiting to be printed. Sometimes, a document in the print queue can become corrupted or incompatible with the printer, and prevent other documents from being printed. This can happen due to various reasons, such as power outage, network interruption, driver mismatch, virus infection, etc12.
To troubleshoot and resolve this issue, the technician can use the diagnostic tool in the printer’s administrator menu, which is a feature that allows the technician to access and configure various settings and options of the printer. The diagnostic tool can help the technician identify and delete the corrupt job in the print spooler, and restart the print service. The technician can also use the diagnostic tool to check the printer’s status, error messages, firmware updates, network settings, and other information that can help with the troubleshooting process34.
The other options are less likely to be encountered by the technician, as they are not related to the printer’s heavy use or the diagnostic tool. Insufficient space in the printer is an issue that can occur when the printer’s memory or storage is full, and it can cause the printer to print slowly or incompletely. However, this issue can be easily resolved by clearing the printer’s memory or storage, or adding more memory or storage to the printer12. Network connectivity issues are problems that can affect the communication between the printer and the network, and they can cause the printer to be offline or unreachable. However, these issues can be resolved by checking and fixing the physical or wireless connection, the network configuration, the firewall settings, and the printer’s IP address12. Improperly installed drivers are issues that can affect the compatibility and functionality of the printer, and they can cause the printer to print incorrectly or not at all. However, these issues can be resolved by updating, reinstalling, or rolling back the printer’s drivers, or by using the correct drivers for the printer’s model and operating system12.

NEW QUESTION 432
A user is requesting a headset that can be physically connected to a laptop for online conference calls. Which of the following connections should the headset use?

Bluetooth

DVI

Thunderbolt

USB

NEW QUESTION 433
A technician is troubleshooting poor printing quality on an inkjet printer. The pages have white lines running through the text and graphics. Which of the following is the most likely cause?

Worn out rollers

Clogged printhead

Faulty ink cartridges

Poor quality paper

NEW QUESTION 434
A technician is implementing a SOHO wireless solution with three access points. Which of the following actions would avoid high latency?

Enabling and configuring a 5GHz antenna

Configuring separate IP ranges

Enabling multiple SSIDs

Configuring all devices with different channels

NEW QUESTION 435
Which of the following cloud models maintains access, even when a local internet outage occurs?

Private

SaaS

Community

Public

NEW QUESTION 436
A user reports limited or no connectivity on a laptop. A technician runs ipconf ig /all with the following result:

Which of the following is the MOST likely cause of this issue?

DHCP failure

ARP cache

DNS resolution

Duplicate IP address

NEW QUESTION 437
A technician is conducting the following tests on a laptop with a wireless NIC:
* ping of the default gateway
* ping of the localhost
* tracert of the IP address of the default gateway
Which of the following will the technician find by running these tests? (Select two).

DNS suffix

Connection latency

Firewall status

Wireless signal strength

Subnet mask of the network

MAC address of the wireless NIC

NEW QUESTION 438
Which of the following network types would be used in a server room to connect virtual servers to high-speed storage?

WAN

PAN

MAN

SAN

NEW QUESTION 439
A technician is working to replace a single DDR3 RAM module on a laptop that has two occupied slots_ When the technician tries to tum on the laptop, the computer starts beeping and does not pass POST The technician double-checks the newly installed RAM and notices a motherboard message indicating low voltage. Which of the following is the most likely cause of this Issue?

Faulty power adapter

Incorrect BIOS settings

Failing CMOS battery’

Unsupported memory

Memory modules are physical components that store data and instructions for the computer to access and process. Memory modules have different specifications and features, such as type, speed, capacity, voltage, and form factor. These specifications and features must be compatible with the motherboard and the processor of the computer, otherwise the memory modules may not work properly or cause errors.
In this scenario, the technician is working to replace a single DDR3 RAM module on a laptop that has two occupied slots. DDR3 stands for Double Data Rate 3, and it is a type of memory technology that offers faster performance and lower power consumption than its predecessors. DDR3 RAM modules have different variants, such as DDR3L, DDR3U, or DDR3R, which have different voltage requirements. For example, DDR3L operates at 1.35V, DDR3U operates at 1.25V, and DDR3R operates at 1.5V.
When the technician tries to turn on the laptop, the computer starts beeping and does not pass POST. POST stands for Power-On Self-Test, and it is a process that checks the hardware components and functionality of the computer before loading the operating system. If POST detects an error or a failure, it may produce a series of beeps or codes to indicate the problem. The number and pattern of beeps or codes may vary depending on the manufacturer or model of the computer.
The technician double-checks the newly installed RAM and notices a motherboard message indicating low voltage. This means that the motherboard is not receiving enough power from the memory module to operate normally. This could indicate that the memory module is not compatible with the motherboard or the processor, or that it is defective or damaged. The most likely cause of this issue is that the technician installed an unsupported memory module that has a lower voltage than what the motherboard or the processor requires.
To resolve this issue, the technician should remove the newly installed RAM module and replace it with a compatible one that has the same voltage as the existing ones. The technician should also check the specifications and features of the motherboard and the processor to ensure that they support the type, speed, capacity, and form factor of the memory modules. The technician should also follow proper safety precautions when handling memory modules, such as wearing an anti-static wrist strap, avoiding physical damage or static discharge, and aligning the notches correctly.

NEW QUESTION 440
Which of the following is a valid use for PaaS?

Off-site backups

An application development environment

A virtual server installation and configuration model

A web application for asset management

NEW QUESTION 441
Which of the following utilizes TCP ports 20/21 and transfers data in cleartext?

SNMP

SSH

FTP

Telnet

NEW QUESTION 442
A sales team user is attending a conference and wants a mobile device that allows the user to quickly collect contact information from as many potential leads as possible. Which of the following connection methods should a technician configure for the user?

USB

NFC

RFID

Bluetooth

NEW QUESTION 443
Following a scheduled power outage, users report they cannot access the local intranet. A technician is able to ping the IP address of the server that is hosting the website. Which of the following serves is MOST likely offline?

Web

DNS

File

DHCP

NEW QUESTION 444
A technician is troubleshooting a thermal receipt printer that will not print. Which of the following should the technician do first to restore functionality?

Update the printer driver on the computer.

Replace the thermal printhead.

Make sure the thermal head is heating up.

Flip the paper roll orientation.

NEW QUESTION 445
A user’s mobile phone gets really hot to the touch and does not retain a charge. The user also reports that the phone is very slow, especially while charging. Which of the following is MOST likely causing these symptoms?

Broken charging port

Digitizer failure

CPU overheating

Defective battery

[Q426-Q445] Get New 2025 CompTIA 220-1101 Exam Dumps Bundle On flat Updated Dumps!

Be the first to reply

Leave a Reply Cancel reply