[Aug-2026] HP HPE7-J01 DUMPS WITH REAL EXAM QUESTIONS [Q34-Q56]

NEW QUESTION 34
An HPE Partner is sizing an Alletra MP B10000 array for a customer using the HPE Ninja Sizer online tool.
When tuning the solution, the partner is not getting the best read and write performance from the array.
Use your cursor to place a + where the partner can click in the web GUI to begin to determine how to correct this Issue and appropriately size the solution for the customer.

NEW QUESTION 35
What is a prerequisite for a successful Fibre Channel storage array Peer Motion migration?

An N-Port ID Virtualization (NPIV) capable FC fabric between the source and destination.

IP connectivity to initiate and control the data migration.

A direct connection between storage arrays via their FC ports.

The configuration of a maximum of eight peer link pairs.

NEW QUESTION 36
Which statement is correct about when an HPE Partner runs a CloudPhysics assessment of a customer’s third-party storage solution?

The HPE Partner must create custom cards to generate an assessment report for the customer.

The HPE Partner and the customer have access to the same cards in CloudPhysics.

The assessment period can last up to 90 days and can be extended for another 90 days.

A premium license must be purchased to assess third-party storage solutions.

NEW QUESTION 37
A storage administrator will be implementing the HPE Peer Persistence feature between many arrays at many different sites across the company. The administrator will be using the Quorum Witness (QW) solution to determine when automatic failover will occur between the primary and secondary arrays. Which statement is correct regarding the use of this feature?

The QW is active and will initiate a failover when a split-brain situation occurs between two HPE Peer Persistence storage arrays.

The QW can only be installed as a VM solution on Red Hat Enterprise Linux or SUSE Linux.

The QW should be installed at a site that is different from where the primary and secondary storage arrays are located.

The QW requires IP and fibre channel (FC) connectivity between the QW and the storage arrays.

NEW QUESTION 38
A storage architect needs to design a highly scalable object storage platform for unstructured data growth exceeding 50 PB over five years. The customer also requires native S3 compatibility.
Which HPE solution is most appropriate?

HPE Apollo 4200

HPE Ezmeral Data Fabric

HPE Alletra MP

HPE GreenLake for File Storage

NEW QUESTION 39
A customer is interested in a backup repository solution with long-term data retention. The customer has the following requirements:
* Needs to leverage secondary storage for development operations and development testing
* Fast granular restore and instant recovery features
* Cost-effective, yet scalable solution that provides built-in replication features What is the best solution for this customer?

HPE Alletra 5000s and Veeam

HPE dHCI and Cohesity

HPE Alletra 5000s and Scality RING

HPE Alletra 4000s and Commvault

The requirements provided point toward a “Secondary Storage” use case where the data must be more than just a “cold” backup; it needs to be “active” for DevOps and testing. The HPE Alletra 5000 (the successor to the HPE Nimble Storage Adaptive Flash arrays) is specifically engineered for this hybrid role.
Architecturally, the Alletra 5000 utilizes the CASL (Content Aware Storage Architecture) file system. This allows it to perform high-speed inline deduplication and compression, making it a cost-effective repository for long-term retention. Crucially for the customer’s DevOps requirement, Alletra 5000 supports Zero-Copy Clones. This means the storage administrator can instantly create multiple copies of production datasets for development and testing without consuming additional storage space or impacting the performance of the primary backup repository.
When paired with Veeam Backup & Replication, the solution meets the “fast granular restore” and “instant recovery” requirements perfectly. Veeam’s vPower technology enables Instant VM Recovery, which allows a virtual machine to be started directly from the compressed and deduplicated backup file on the Alletra 5000.
Because the Alletra 5000 includes a flash tier for metadata and frequently accessed data, it provides the necessary IOPS to run these recovered VMs or DevTest workloads with near-production performance.
In contrast, while Cohesity (Option B) is a strong secondary platform, HPE dHCI is a primary infrastructure solution and not just a backup repository. Scality RING (Option C) is an object storage solution geared toward massive scale and petabyte-level archives, but it lacks the performance characteristics for “instant recovery” and seamless DevOps cloning found in the Alletra 5000. HPE Alletra 4000 (Option D) is a high- density data server (formerly Apollo) which provides the raw hardware but lacks the integrated CASL-based intelligence and “Better Together” orchestration that the Alletra 5000/Veeam partnership offers for this specific customer profile.

NEW QUESTION 40
Match the fibre channel topology to its use case. Each answer will be used once.

NEW QUESTION 41
Drag and Drop Question
Order the steps for a write data path and a successful write IO in HPE GreenLake for File Storage using NAS.

NEW QUESTION 42
Which statement is correct about when an HPE Partner runs a CloudPhysics assessment of a customer’s third- party storage solution?

The HPE Partner must create custom cards to generate an assessment report for the customer.

The HPE Partner and the customer have access to the same cards in CloudPhysics.

The assessment period can last up to 90 days and can be extended for another 90 days.

A premium license must be purchased to assess third-party storage solutions.

NEW QUESTION 43
An HPE Partner is using HPE CloudPhysics to size a new storage solution for a customer that currently has a non-HPE storage array. When looking at the graphs and statistics in CloudPhysics, what is the only summary statistic that has time-correlated values?

Storage Metrics

Peak Details

Hardware Performance

Deduplication Performance

NEW QUESTION 44
An HPE customer purchased an HPE B-Series SN7000B SAN fabric switch. QoS is currently not enabled.
Which two statements are correct regarding buffer-to-buffer (BB) credits and the operation of the switch?
(Choose two.)

BB credits can be adjusted for specific applications or operating environments, but they must be agreed upon among all switches to allow the formation of the fabric.

The default window size for fibre channel (FC) frame transmission is 1, but can be increased to 8 or 16, depending on the switch model.

Each user port reserves eight buffer credits when online or offline.

BB credits are based on link speed and frame size.

By default, all BB credits are reserved.

NEW QUESTION 45
A customer plans a hybrid cloud strategy and wants unified on-premises and cloud storage management through one operational model. Which HPE approach fits best?

Local DAS only

HPE GreenLake

USB backup drives

Tape vaulting only

NEW QUESTION 46
A customer has an older HPE StoreOnce Gen3 data protection solution. They do not want to upgrade the hardware, but they do want to integrate the existing solution with AWS using HPE Cloud Bank Storage. Other than HPE Cloud Bank licenses, what must also be included in the bill of materials (BOM)?

StoreOnce VSA appliance license

Object store license

Catalyst license

RAM upgrade

NEW QUESTION 47
Order the steps for a write data path and a successful write IO in HPE GreenLake for File Storage using NAS.

Explanation:
* Data is sharded randomly across multiple SCM drives to increase throughput and decrease contention.
* Data is written to two different SCM drives so no data is lost in the event of a SCM drive failure.
* Metadata is updated in the internal data structure (tree) for consistency.
Comprehensive and Detailed 250 to 300 words of Explanation From Advanced Storage Solutions Architect documents and knowledge guide:
The write data path in HPE GreenLake for File Storage (powered by Alletra MP X10000 hardware and VAST Data software) follows a unique Disaggregated Shared-Everything (DASE) architecture. Unlike legacy NAS systems that use front-end caching or complex controller-to-controller talk, this solution leverages Storage Class Memory (SCM) as a persistent write buffer to provide high-sustained performance without the need for traditional data movement between tiers.
The process begins with sharding. When a NAS write request arrives, the system immediately shards the data randomly across multiple SCM drives in the cluster. This sharding is critical because it eliminates hot spots and contention by ensuring that no single drive or node becomes a bottleneck, effectively parallelizing the IO load across the entire storage fabric.
Once the sharding logic is determined, the data is physically written to the SCM tier. To ensure mission- critical resilience, every write is mirrored (written to two different SCM drives). Because SCM is non-volatile random-access memory (NVRAM), the write is persistent the moment it hits the media. This allows the system to send an immediate acknowledgement back to the client while protecting against a drive or node failure.
Finally, the metadata is updated in the internal data structure (the V-Tree). This step ensures the “View” of the file system remains consistent and that the global namespace reflects the newly written data. After this point, the data is asynchronously moved from SCM to high-capacity NVMe SSDs using wide-stripe erasure coding for long-term, efficient storage. This disaggregated flow allows the Alletra MP X10000 to scale performance and capacity independently while maintaining strict data integrity and consistency at AI-scale.

NEW QUESTION 48
A storage administrator wants to set up NAS replication between two HPE StoreOnce appliances.
A corresponding NAS library was created between the two systems, primary and secondary, where the secondary will receive the replicated information. When the administrator tries to create the NAS mapping on the primary StoreOnce solution, the administrator is presented with an error stating they do not have permission. What should the administrator do to solve this issue?

On the primary StoreOnce appliance, generate an access token and configure this token on the secondary StoreOnce appliance.

On the secondary StoreOnce appliance, set the Replication Permissions to allow Enabled Public Access.

On the secondary StoreOnce appliance, define the primary StoreOnce appliance, along with the respective username and password.

On the primary StoreOnce appliance, define the secondary StoreOnce appliance, along with the respective username and password.

NEW QUESTION 49
What is a dependency to keep in mind regarding trunking, cable lengths, and deskew units when calculating RTT for fibre channel Brocade ISLs for optimal performance?

The shortest ISL is set to a deskew value that depends on the switch hardware platform generation.

Trunks can be a mixture of cable lengths, as long as all cables in the ISL use the same transceiver type.

Deskew units represent the time difference for traffic to travel over a single connection of the ISL.

A 20-meter difference is approximately equal to one deskew unit.

NEW QUESTION 50
A customer needs to replace their current data protection solution, including hardware and software.
They have the following requirements:
– A single data management platform for data protection of hypervisor,
container, cloud, physical, database, and application workloads
– Eliminate data silos across backups for files, objects, and archiving
– Needs to support a large, scale-out NAS solution
What is the best solution for this customer?

HPE GreenLake Flex with Commvault and HPE Alletra 4000 storage servers

HPE GreenLake Flex with HPE Zerto and HPE StoreOnce appliances

HPE GreenLake Flex with Cohesity and HPE Alletra 4000 storage servers

HPE GreenLake Flex with Veeam and HPE Alletra 4000 storage servers

NEW QUESTION 51
An HPE Partner is creating a proposal for an HPE customer that involves HPE Morpheus Enterprise. What does the partner need to determine to configure the correct number of Morpheus licenses in Online Config Advanced (OCA)?

The customer CPU count

The customer VM count

The customer workload elements (WLEs) on-prem and in the public cloud

The license types are the Community Edition type

NEW QUESTION 52
A company has many applications running on bare metal, as well as on VMs.
Match the data protection software solution with its description. Each answer will be used once.

NEW QUESTION 53
An HPE Partner is talking to a potential customer about the HPE Alletra MP B10000 storage array solution. What is an important feature the partner should share with the customer?

When writing data into volatile memory, SCM is persistent with batteries.

Stripe sizes vary from 16 (data) + 3 (parity) to 146 (data) + 3 (parity).

If locally decodable EC is implemented by the customer, this will increase rebuild time.

The behavior of common applications can be predicted with Workload Simulator.

NEW QUESTION 54
A customer wants to implement HPE Cloud Bank Storage with the detach option LTU feature. Which statement is correct regarding the implementation of this feature?

HPE Cloud Bank Store must be connected using the connect (read-write) option.

A detached Cloud Bank datastore can only be reconnected to the HPE StoreOnce system from which it was detached.

HPE Services is always required when reconnecting a detached datastore.

Support for reading and writing to the detached datastore is supported with the detach license installed.

NEW QUESTION 55
An HPE Partner is designing a disaster recovery architecture based on Zerto. The architecture has two sites: a production site and a disaster recovery (DR) site. Which option best describes the solution when the Extended Journal Copy feature is implemented?

A Zerto Virtual Manager (ZVM) is installed at each site.
A Virtual Replication Appliance (VRA) is installed on each hypervisor host at each site.
Replica and the compressed journals are stored at the DR site only.
No additional space is needed at the production site.
Extended Journal Copies are always taken from the DR site.

A Zerto Virtual Manager (ZVM) is installed only at the production site.
A Virtual Replication Appliance (VRA) is installed on each hypervisor host at each site.
Replica and the compressed journals are stored at both the production and DR sites.
Additional space is needed at the production site.
Extended Journal Copies are always taken from the DR site.

A Zerto Virtual Manager (ZVM) is installed only at the production site.
A Virtual Replication Appliance (VRA) is installed on each hypervisor host at each site.
Replica and the compressed journals are stored at the DR site only.
No additional space is needed at the production site.
Extended Journal Copies are always taken from the DR site.

A Zerto Virtual Manager (ZVM) is installed at each site.
A Virtual Replication Appliance (VRA) is installed on each hypervisor host at each site.
Replica and the compressed journals are stored at both the production and DR sites.
Additional space is needed at the production site.
Extended Journal Copies are always taken from the production site.

NEW QUESTION 56
A customer currently has a Dell EMC storage array and wants to migrate data to a newly purchased HPE Alletra MP B10000 storage array. Which solution should the administrator use to perform the migration?

Online Import Utility (OIU) over fibre channel (FC)

Remote copy over iSCSI

Peer persistence over fibre channel (FC)

Peer motion utility (PMU) over fibre channel (FC)

[Aug-2026] HP HPE7-J01 DUMPS WITH REAL EXAM QUESTIONS [Q34-Q56]

Be the first to reply

Leave a Reply Cancel reply