Hybrid-Cloud-Observability-Network-Monitoring Dumps PDF – Hybrid-Cloud-Observability-Network-Monitoring Real Exam Questions Answers [Q58-Q72]

Rate this post

Hybrid-Cloud-Observability-Network-Monitoring Dumps PDF – Hybrid-Cloud-Observability-Network-Monitoring Real Exam Questions Answers

Get Started: Hybrid-Cloud-Observability-Network-Monitoring Exam [year] Dumps SolarWinds PDF Questions

NEW QUESTION 58
What is required to submit an MIB database update request to SolarWinds?

polling interval to monitor the metric

SNMP or MIB walk from the device

specific object ID (QID) for polling

type of widget to populate data

NEW QUESTION 59
Which tool is used to establish flow alerts?

create alert flows

create a flow alert panel

flow alert wizard

manage flow alert pane

NEW QUESTION 60
A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent. Which two of the following options can be used to set up the probe? (Choose two.)

Install the agent on a Red Hat Linux server.

Install the agent on a Windows 10 computer.

Run the probe from the hybrid cloud observability (HCO) server.

Use the network device agent to run the probe from the router.

NEW QUESTION 61
After creating a new device studio poller that appears to be returning values on a test device, it is then applied to additional nodes. One of these new devices is not returning the statistics of the test node. Which two of the following reasons might be the cause of the issue? (Choose two.)

Communication issue exists in new device

Devices have different firmware versions

New device needs to be rebooted

Object IDs (OIDs) are not supported

NEW QUESTION 62
If an SNMP community string is changed on a device, which two of the following steps are required to re-establish successful polling on the node? (Choose two.)

Delete and add the node back into the platform.

Edit the node properties and save the changes.

Restart the SNMP service on the source device.

Update the community string in node properties.

NEW QUESTION 63
You are tasked with integrating a new Cisco ACI fabric into SolarWinds Hybrid Cloud Observability for deep monitoring and correlation. Which of the following steps must be performed to ensure end-to-end visibility, automatic discovery of APIC objects, and successful alerting on fabric health? (Choose three.)

Add the APIC cluster as an SNMP v3 device with the ACI plugin enabled and specify the correct read- write community.

Configure API polling credentials for the APIC cluster under “Settings > All Settings > Manage ACI” in SolarWinds.

Enable NetFlow export from all ACI leaf switches to the SolarWinds collector and import flow definitions in the Platform.

Map tenants, application profiles, and endpoint groups (EPGs) to custom properties for advanced alerting and reporting.

Comprehensive and Detailed Explanation From Exact Extract:
According to the latest SolarWinds Administrator Guides, integrating Cisco ACI for true Hybrid Cloud Observability involves several coordinated steps:
* B. Configure API polling credentials for the APIC cluster under “Settings > All Settings > Manage ACI” in SolarWinds.SolarWinds Hybrid Cloud Observability leverages API-based polling (not only SNMP) to retrieve comprehensive fabric topology, health scores, faults, and logical object inventory (tenants, application profiles, EPGs, etc.). Configuration of API credentials is required to access these features.”For deep ACI monitoring, use API credentials under ‘Manage ACI’. SNMP alone is insufficient for advanced monitoring, object mapping, or health correlation.”
* C. Enable NetFlow export from all ACI leaf switches to the SolarWinds collector and import flow definitions in the Platform.NetFlow is essential for capturing east-west and north-south traffic inside the fabric, and SolarWinds uses this flow data for bandwidth analysis and path visualization.
“SolarWinds recommends enabling NetFlow export on all leafs and importing flow records to gain traffic visibility inside Cisco ACI environments.”
* D. Map tenants, application profiles, and endpoint groups (EPGs) to custom properties for advanced alerting and reporting.Custom properties in SolarWinds allow mapping logical ACI constructs to alert rules, reports, and dashboards for business-centric monitoring.”Map EPGs and application profiles to custom properties for granular alerting and business-aligned dashboards.” Option A is incorrect because the official guide states that API polling (not just SNMP v3 with plugins) is required for automatic APIC object discovery.
References:
SolarWinds Platform Administrator Guide, “Monitoring Cisco ACI Environments,” 2024.1 NPM Administrator Guide, “Configuring API Polling for Cisco ACI,” 2024.1
“Best Practices for Cisco ACI Monitoring,” SolarWinds Success Center

NEW QUESTION 64
If an SNMP community string is changed on a device, which two of the following steps are required to re- establish successful polling on the node? (Choose two.)

Delete and add the node back into the platform.

Edit the node properties and save the changes.

Restart the SNMP service on the source device.

Update the community string in node properties.

NEW QUESTION 65
Flow data is not generating from a device in the web console. Wireshark was used to confirm the flows are being sent from the device to the poller and not blocked by the firewall. Why is the data not showing in the web console?

device is not monitored by hybrid cloud observability (HCO) features

device is using IPv6 and HCO only supports IPv4

missing source address field in flow configurations

flow monitoring was not enabled as device type in web console settings

NEW QUESTION 66
Which two of the following actions can be taken to resolve unknown flow traffic events? (Choose two.)

Add the devices and interfaces to SolarWinds’ database.

Configure devices to send all flow data.

Enable automatic addition of flow sources.

Ensure flow-enabled devices send data to appropriate port.

NEW QUESTION 67
Which NetFlow component can be applied to an interface to track IPv4 traffic?

flow exporter

flow monitor

flow record

flow sampler

NEW QUESTION 68
One NetPath probe is showing a “no data found” error, however other probes are returning data without issue.
What is the most likely resolution?

add the probe ID to the engines table manually

delete the probe, reinstall the agent manually, and re-add the probe

probe was added in NetPath without an agent installed on its node

restart the SolarWinds agent service on the node

NEW QUESTION 69
The fan of a network device has failed; however, the status shows as “up” on the current hardware health resource in the node details view. Which two of the following causes could be creating the issue? (Choose two.)

hardware sensors are disabled

resource is showing outdated information

threshold of the fan sensor has been forced

wrong MIB being used for polling

NEW QUESTION 70
The web console is showing the status of a network router as “down”, however the node is up and running.
Which two of the following causes could be creating the issue? (Choose two.)

agent connection status with the polling engine is “down’

ICMP is blocked between the device and the polling engine

router is configured as a parent in a node dependency

SNMP is blocked between the device and the polling engine

NEW QUESTION 71
What is the correct sequence of steps to create a device studio poller?

Assign the poller to node, select the technology, specify the data source, and save the poller.

Select the technology, assign the poller to node, specify the data source, and save the poller.

Select the technology, specify the data source, assign the poller to node, and save the poller.

Select the technology, specify the data source, save the poller, and assign the poller to node.

NEW QUESTION 72
To drill down into a log summary for a specific node, where in SolarWinds’ platform can a user view these logs?

Alerts and Activity > Message Center

My Dashboard > Logs > Log Viewer

Node Details Summary > Management > Analyze Logs

Node Details Summary > Management > List Resources

Hybrid-Cloud-Observability-Network-Monitoring Premium Exam Engine pdf Download: https://www.actualtorrent.com/Hybrid-Cloud-Observability-Network-Monitoring-questions-answers.html

Hybrid-Cloud-Observability-Network-Monitoring Dumps PDF – Hybrid-Cloud-Observability-Network-Monitoring Real Exam Questions Answers [Q58-Q72]

Be the first to reply

Leave a Reply Cancel reply