HPE Technical HPE2-K45 Practice Test Engine Try These 40 Exam Questions [Q18-Q37]

NO.18 A customer plans to mix nodes with different drive configuration in the same cluster. What should you explain
to this customer?

Mixing nodes with different drive configuration requires an additional license.

Mixing different drive configurations within a cluster results in unbalanced 10 performance.

Mixing nodes with different drive configuration is available only for AMD-based nodes.

Mixing All-flash and hybrid nodes in the same cluster is supported.

NO.19 You want to use Lanamaric to collect Information from an existing customer environment to support the
solution design process. The customer informed you that the existing ESXi infrastructure is not connected to
the internet.
What can you do to collect the data using Lanamark?

Using REST API, retrieve performance data from HPE neView and upload to Lanamark analyzer.

Ask the customer to install a Lanamark agent on each ESXi server, and deploy a log collector on the
workstation within the same network.

Download performance data collected Dy the vCenter Server, and upload them to Lanamark.

Download Lanamark Snap and use it to collect the data, and then upload manually to the Lanamark
portal.

NO.20 Which HPE SimpliVity model can be equipped with the HPE mniStack Accelerator card?

HPE SimpliVity 380 Genl0

HPE SimpliVity 2600

HPE SimpliVity 380 Gen10 H

HPE SimpliVity 325 Gen10

NO.21 How is each datastore presented to HPE SimpliVity nodes?

as a part of vSAN

as a VMFS datastore

as an NFS datastore

as a vVol

NO.22 What happens if an HPE mniStack Virtual Controller (VC) fails in a multi-node HPE SimpliVrty cluster?

All VMs on the node restart in a node where the replica resides.

HPE SimpliVity Intelligent Workload ptimizer restores the VC from backups.

The IP address of the VC fails over to another HPE SimpliVity node.

All VMs on the node go on standby mode to avoid data loss.

NO.23 What is the difference between crash consistent and application consistent cloning methods?

Application-consistent clones allow the pending 10 operations to finish before committing them to the
database.

Both methods are the same; the only difference is speed of cloning.

Crash consistent method should be used only for the virtual machines with Fault Tolerance enabled.

Application consistent method is available only for Linux operating systems.

NO.24 You are designing an HPE SimpliVity solution with HPE Storence.
Which design aspects will you evaluate to optimize replication performance?

Performance optimization features provided by VMFS datastores comapred to NFS datastores

Number of the HPE SimpliVlty clusters and Catalyst stores used

Intelligent Workload optimizer settings

HPE SimpliVity model used

NO.25 Which criteria does HPE SimpliVity use to decide how many streams it needs to copy data to an HPE Storence
target?

datastore size

VM size

available bandwidth

latency requirements

NO.26 You are designing a new HPE SimpliVity solution. You want to confirm your configuration is compatible and
supported with the customer requirements. Which items can you find in the HPE SimpliVity mniStack
Interoperability Guide? (Select two.)

GPU Accelerators

ESXi version

Guest S version

vSphere License

Processor model

NO.27 You want to use the HPE SimpliVity move operation to move a virtual machine between clusters. What do
you have to do prior to completing the move operation?

Install VS5 agent in the virtual machine.

Take a virtual machine snapshot.

Shut down the virtual machine.

Suspend the virtual machine.

NO.28 In an HPE SimpliVity 10-node cluster, a simultaneous increase of 10 requests across several VM caused a
surge in 10 traffic in a single node. Which HPE SimpliVity feature can evenly distribute the 10s across the
cluster?

Resource Balancer

Management Virtual Appliance

Arbiter

Intelligent Workload optimizer

NO.29 A customer wants to deploy HPE SimpliVity for a VDI Implementation. They need to add two NVIDIA GPU
accelerators per hypervisor, and they have limited space in the data center. Which HPE SimpliVity model
meets the customer needs?

HPE SimpliVity 2600

HPE SimpliVity 325 Gen10

HPE SimpliVity 380 Gen 10 LFF H

HPE SimpliVity 380 Ge10G

NO.30 You try to delete an existing datastore, but the operation fails. What is a likely cause of the failure?

The datastore is marked as read-only.

The FC connection between the host and array has failed.

The management network for a host is disconnected.

This datastore is not added to your scope.

NO.31 Which functionality does HPE InfoSight for HPE SimpliVity provide?

balance workloads across HPE SimpllVity nodes based on utilization

recommendation for guest operating system settings optimization

automated firmware and software upgrades for registered customers

monitoring of virtual machine latency

NO.32 A customer plans to deploy HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes.
What should you recommend tor this setup?

Put each type of the nodes in a different federation.

Replace the LFF nodes with all-flash nodes.

Put all of the nodes in the same cluster.

Put SFF and LFF nodes in separate clusters.

NO.33 Hyper Protected refers to which HPE SimpliVity ability?

Backup or restore 1TB VM in less than 1 minute.

Restore individual files from a VM backup.

Define a storage policy using RAID 6 or RAID 60 to protect the VM.

Integrate with Veeam to provide an external backup solution.

HPE Technical HPE2-K45 Practice Test Engine Try These 40 Exam Questions [Q18-Q37]

Be the first to reply

Leave a Reply Cancel reply